• Note: All prices are inclusive of VAT

  • Free Standard UK Delivery available on orders over £120

  • Call us on 0141 459 3141 to speak to a member of the team.

CLOSE
CLOSE

Other Equipment

Other equipment used in fitting renewable energy heating systems

Showing all 6 results


  • The screw-in 3Kw  immersion heaters from Austria Email “SH” series are designed for additional heating or emergency heating of water in closed containers.

    The 1½” brass screw head makes it easy to retrofit the water heaters.

    Key features:

    • Insulated built-in Incoloy heating pipes
    • Continuous temperature adjustment between 15 and 75 °C
    • All-pole safety temperature limiter
    • Black plastic cap, rotatable

    Please note other sizes available on request at sales@biomasssupplies.co.uk

    Further technical information about the Immersion Heater SH series can be found in the installation guidePDF-download

  • The screw-in 3Kw  immersion heaters from Austria Email “SH” series are designed for additional heating or emergency heating of water in closed containers.

    The 1½” brass screw head makes it easy to retrofit the water heaters.

    Key features:

    • Insulated built-in Incoloy heating pipes
    • Continuous temperature adjustment between 15 and 75 °C
    • All-pole safety temperature limiter
    • Black plastic cap, rotatable

    Please note other sizes available on request at sales@biomasssupplies.co.uk

    Further technical information about the Immersion Heater SH series can be found in the installation guidePDF-download

  • The Chimney fan’s purpose is to take the fumes out of the log boiler when the door is opened when loading fuel.

    WKO fans are great for efficiency, low volume and weight.

    Engine Rotation Speed 2760 trn/min
    Engine power 19 W
    Power Rating 38 W
    Inlet-outlet diameter 200 mm
    Rotor exterior diameter 175 mm
    Weight (excluding engine) 14 kg
    Weight (including engine) 16.5 kg
    Max temperature 300 °C
    Max fan efficiency 400 m3/h

    15 Loyalty Points

  • Laddomat 21-60 is a charging unit for a gasifying boiler and enables the boiler to heat to a working temperature in a very short time.

    Inlets and outlets compression: 28mm
    Opening temperature: 72 oC
    Weight: 6.6 kg
    Boiler nominal heating power: up to 60 kW

    Key features:

    • Charging is continued by means of a slow flow of hot water.

    • During the final part of the burn-out the Laddomat 21-60 charges the storage tank fully due to the unique thermal valve, which closes the bypass opening completely.

    • When the fire has gone out, the Laddomat makes use of the remaining heat in the boiler and ember by the self-circulation of hot water from the top of the boiler into the storage tank.

    • In the event of a power failure Laddomat 21-60 starts charging the container immediately by self-circulation.

    The same happens if the pump breaks down. Reverse circulation is prevented during periods of non-firing, which means almost no loss of heat.

    The laddomat comes with a 24 month warranty

    120 Loyalty Points

  • Laddomat 21-100 is a charging unit for a gasifying boiler and enables the boiler to heat to a working temperature in a very short time.

    Inlets and outlets compression: 1 1/4″ F
    Opening temperature: 72 oC
    Weight: 8.9 kg
    Boiler nominal heating power: up to 120 kW

    Key features:

    • Charging is continued by means of a slow flow of hot water.

    • During the final part of the burn-out the Laddomat 21-100 charges the storage tank fully due to the unique thermal valve, which closes the bypass opening completely.

    • When the fire has gone out, the Laddomat makes use of the remaining heat in the boiler and ember by the self-circulation of hot water from the top of the boiler into the storage tank.

    • In the event of a power failure Laddomat 21-100 starts charging the container immediately by self-circulation.

    The same happens if the pump breaks down. Reverse circulation is prevented during periods of non-firing, which means almost no loss of heat.

    The laddomat comes with a 24 month warranty

    139 Loyalty Points

  • Freshwater Module

    A Freshwater Module installed in conjunction with buffer tank allows the energy stored in the buffer to be transferred to the cold mains water through a plate heat exchanger. A flow switch signals that heat is required and a pump runs to charge the primary side of the plate heat exchanger.

    Key features:

    Rated Performance: 40 l/min
    Max Operating Temperature (primary): 95°C
    Max Operating Temperature (Secondary): 95°C
    Max Operating Overpressure (primary): 3 bar
    Max Operating Overpressure (Secondary): 6 bar
    Dimensions: 490 x 637 x171 mm

    Further technical data can be found in the installation brochurePDF-download

    666 Loyalty Points


Showing all 6 results

GET IN TOUCH

Unit 16, Whitegates Business Park,
Lenzie Road,
Kirkintilloch, East Dunbartonshire,
G66 3BQ

e: enquiries@vpsplumbing.co.uk
p: 0141 459 3141

Vulcan Plumbing Supplies

VPS Plumbing Supplies only sells high quality products from trusted suppliers. We have access to a wide range of fittings, products, equipment and technology solutions for plumbers and heating engineers - Public and Trade sales welcome.
About Us | Our Services | Contact Us