Description
**CLICK HERE TO USE THE NEW VPS HOT WATER CYLINDER SITE FOR ALL CYLINDER ORDERS**
Gledhill StainlessLite Indirect 90 litres Unvented Cylinder
The Gledhill StainlessLite Indirect 90 litres is designed for use for use with a conventional boiler including gas, oil and biomass. Also fitted with immersion heater (s).
Stainless Lite Brochure
Stainless Lite Design, Installation & Servicing Instructions
It is available in 8 different sizes ranging from 90 litres to 400 litres. The 400 litre model is capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms. The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coils corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)
- Indirect Cylinder – Heated by an external heat source such as a boiler. Heat is transferred to the water through an internal coil.
- Unvented Cylinder – Pressurised unit, fed directly from mains water. No header tank required. This means that hot water will be supplied to outlets such as showers and taps at mains pressure.Gledhill, the cylinder specialist, manufactures a wide range of unvented cylinders, which provide powerful, mains-pressure hot water and high flow rates ideal for small homes with single bathrooms through to larher homes with multiple bathrooms.The unvented range are all manufactured using the highest grade of duplex stainless steel, providing both strength and durability.This diagram shows a typical set up:[layerslider id=”11″]
Gledhill StainlessLite Indirect 90 litres Unvented Cylinder Technical Specifications:
- Description : Indirect 90litres
- Code: ASL0035
- Energy efficiency Class: B
- Heal Loss : 35 Watts
- Capacity: 90 litres
- Height: 745 mm
- Diameter: 550mm
- Weight (empty): 19 kg
- Weight (full): 109 kg
- Heat Up Time: 17 mins
- Number of Immersions: 1
- Secondary Return: No
In conclusion, if you insist on fitting high quality, brand leading products in your home then please consider Gledhill products. Gledhill have a proven track record in manufacturing high quality tanks.
